SS304/GI/MS. Design Concept Self-contained, pre-wired, fully equipped air shower/ tunnel systems help solve decontamination problems.
HEPA filter/fan modules (rated 99.997% efficient @ 0.3 micron particles) wash personnel with Class 100 air to dislodge and remove particles.
A control panel provides programmable control over access door operation · Interlocking doors minimize contamination, releasing automatically in the event of power failure ·
Fluorescent lighting is housed in the ceiling to provide 300 lux level.
These air showers and tunnels offer an effective way to remove surface-deposited particles from personnel before they get to the clean room Enter the clean room and leave particles behind Air showers and tunnels supply concentrated Class 100, clean air flows to remove contamination while an individual stands in a specially constructed air chamber. When an automatic switch inside the unit is activated, pressurized air streams from adjustable nozzles at a velocity of 6,000 feet per minute, a force that supplies the sufficient scrubbing action necessary to remove particulate matter.
Minimum Velocity of 5000FPM - Cleanroom Air Showers are designed to supply ISO Class 5 (Class 100) airflow while removing particulate contamination from personnel entering a cleanroom. An individual can stand or walk through the chamber and be scrubbed by pressurized air from nozzles at a minimum velocity of 5000 FPM.
HEPA Filters - HEPA filtered air flows through wall mounted nozzles and contaminated air is forced through secondary filters located near the floor.
Lighting - Fluorescent lighting is provided in the ceiling.
Voltage - Voltage options are 208-230, 50 or 60 Hz and 440/480 volts, 3 phase, 60 Hz.